Frank Mori has identified that the staff of the Rev Shop need some training in Occupational Health and Safety (OHS), to develop their skills and knowledge in this area in line with legislative requirements and industry standards.
The unit AURC27013A has been chosen for the training, and assessment will also be required - that's where you come in. For this project, you need to:
The project planner gives you two ways to find all the information you need to complete this project. Both options contain the same learning material, just choose the approach that suits the way you like to work!
Click on the "Project Guide" tab below for a step-by-step guide instructions to help you complete this project. The Project Guide includes direct links to all the resources and information you need. Choose this option if you like to work through projects in a methodical step-by-step way.
or...
Click the "DIY Project" tab below for a complete list of all the resources and information that relate to this project, and select the ones you wish to investigate. Choose this option if you would prefer to figure things out in your own way.
or...
Click the "Workplace Project" tab below if you are currently involved in (or have experience with) competency-based training and assessment as a VET trainer/assessor.
Hi there! As you may know, my name is Stephanie Mills and I'm the expert on assessment here at OLS.
As discussed in the project description on the previous screen, you will need to design an assessment plan with supporting documents for the unit AURC27013A - Apply safe working practices.
For this project you need to:
Remember, you can choose the PROJECT GUIDE option, where I'll break the task down into easy to follow steps, or the DIY Project option, where you can follow your own direction.
When you have completed this project, save your work into your evidence portfolio and check with your facilitator for further instructions.
© Commonwealth of Australia | Licensed under AEShareNet – S Licence